We are currently not reacheable, we are sorry!
New

Original dewang 2nd generation 3D Printing Pen LED/LCD DIY Screen 3D Pen With Pen+200M ABS/PLA

10500 Items
1
$49.00
Color
  • Blue
  • Pink
  • Blue and 200 meters
  • Blue and 150 meters
  • Yello and 200 meters
  • Yello and 150 meters
  • Yello
  • Pink and 200 meters
  • Pink and 150 meters
  • Purple and 200 meter
  • Purple and 150 meter
  • Purple
Consumable Type
  • ABS Filagment
  • PLA Filagment
Quantity
In stock

 

[dewang]We focus on 3D pens and 3D Filament.Commitment products are 100% original.Hope happy shopping!!!

Note: We can provide you blue /yellow /purple /pink  3d printer pen with AU/US/UK/EU plug,

Please leave a message on the plug you want, If there is no message,We will send the plug according to your country.

110111213141516171819202122
 
32

Step 1 : Connect the AC / DC adapter

               Connect the power adapter with 3d pen , wait for the preheating  process ( yellow light ) .  
33
 
Step 2:Loading filament  
 
The screen will show the temperature . When the green light is on,it is ready for loading filament . Pressing the filament loading button  ( one click , load and push the filament in ) . Pressing temp " + " and  " - " button to adjust different model : PLA is 160-210C,ABS is 210- 235C.Wait for filament comes out from nozzle , Pressing  loading filament button and draw your objects.Adjust speed by pressing the speed button .            

34

Step 3 : unloading filament  
 
After drawing , melting filament in nozzle by pressing loading  button to prevent nozzle block.Then pressing unloading filament button to unload the filament ( one click ) , clean the nozzle .

35

 
NOTE:  
1.The device will switch to standby mode if not being used over 2 minutes .  and Press the loading filament button to     wake it up . 
2. You need cut the filament ending to smooth before loading  
3. Unloading the filament after each use is highly recommended .  
4. After drawing , melting filament in nozzle by pressing loading button to  prevent blockage.  
5. Only temp reach 185 C , you can unload the filament to lower the chance  of blockage. 

242528

HTB1HNBABXGWBuNjy0Fbq6z4sXXaO.jpg

 

About Shipment:

1. WORLDWIDE SHIPPING. (Except some countries and APO/FPO)
2. Orders processed timely after the payment verification.
3. We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address.
4. If you have not received your shipment within 30 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
 

Return & Refund:

1. You have 7 days to contact us and 30 days to return it from the date it was received.

2. All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number.
3. We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included, Buyer and Seller cancel the transaction from aliexpress. OR, you may choose to have a replacement.

 

About Guarantee:

1. 12 months Manufacturer`s limited Warranty for defective items (excluding items damaged and/or misused after receipt). Accessories come with a 3-month warranty.

2. Defective items MUST BE reported and returned within the warranty period (and in the original packaging, if possible). You must tell us what the defect is and give us your order number. WE DO NOT REPAIR OR REPLACE ITEMS WITH AN EXPIRED WARRANTY.

 

About Feedback:

We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

 

 

 

10500 Items
1

Data sheet

Size
1.75mm/Nozzle0.7mm
Model Number
G2-200
Color
Blue Yellow Pink Purple
Adapter Type
US UK EU AU
Sprinkle Speed
Adjustable
Adapter current
110/240V 3A
Extrusion Mode
Fused Deposition Modeling